View Here : Measure Tire Tread With Penny
When performing the penny tire test, remember not only to check each tire, but to check various places around each tire. Pay special attention to areas that look the most worn. Even if parts of your tread are deeper than 2/32”, you should still replace the tire when any areas fail the penny test.
How to Check Tire Tread with a Penny. There is a simple and no-cost way to check the tread on your tires. With the simple use of an Abe Lincoln penny, you can quickly determine whether or not you need to buy new tires.
Place a penny into several tread grooves across the tire. If part of Lincoln's head is always covered by the tread, you have more than 2/32" of tread depth remaining.
Penny test for tires – how to measure tread depth. You may have heard of the penny test for tire tread depth and wondered if it’s something a layperson can manage, and a reliable test and indication of tire tread depth. The answer to both is “yes!”
The penny test is an easy and accurate way to measure tire tread depth. Take a penny and place it between the tire tread blocks with Lincoln’s head upside down and facing you. If Lincoln's head is buried, your tires still have more than 2/32" of tread.
When it comes to checking tire tread, there are a number of methods that can help you know if it’s time to replace a tire. Heavily worn tread will prevent a tire from performing as designed and can lead to unsafe driving conditions. How to measure your tire tread depth with a penny. Place a penny between the tread ribs on your tire.
There are several popular ways to check your tire tread depth. One easy way is the penny test. Simply insert a penny into your tire's tread groove with Lincoln's head upside down and facing you. If you can see all of Lincoln's head, your tread depth is less than 2/32 inch and it's time to replace your tires.
Measuring Tread Depth With the Penny Test A new car tire typically has a tread depth of 10⁄32 or 11⁄32 inches while a light truck will have between 11⁄32 and 19⁄32 inches. The U.S. Department of Transportation recommends that you replace your tires once they’ve worn down to 2⁄32 inches.
Put a penny into the gap between tread blocks with Abe's head facing down. If you can see all of Lincoln's head, your tread depth is below 2/32” and the tire is legally bald. Replace immediately. If the president's head is covered at all, the tire is above 2/32”.
With this easy test, a penny can buy you peace of mind when it comes to your tires and safety. Place a penny head first into several tread grooves across the tire. If you always see the top of Lincoln’s head, your treads are shallow and worn. If this is the case, your tires need to be replaced. If part of Lincoln’s head is always covered by ...